The BUCK Elite-1™ is a data logging, programmable personal air sampler that consists of a pump contained in a high impact steel fiber filled Lexan, antistatic, and RFI/EMI-shielded case, exclusive electronic circuit board for constant flow control, an LCD display with 2 lines of 16 characters, a single diaphragm pump mechanism, and a rechargeable NiMH battery pack. Now includes Standard Smart NiMH charger at no additional cost. This charger will charge pump battery pack (APB-109029) in approx. 2.5hrs.

• Data logging and programmable for multiple Start/Stop and duration sampling with up to ten ON/OFF durations and repeat options
• Flow range 0.1-0.6 LPM (100-600 cc/min), plus 5-99 cc/min using the included Universal Low Flow Holder
• High back pressure compensation up to 36" of water @ 300 cc/min with ±5% accuracy of compensation range
• Flow compensation for filter plugging and battery voltage, with auto-restart within one minute of a flow fault
• Runs 20+ hours @ 300 cc/min; rechargeable NiMH single pack included, with optional triple pack for extended run time
• Backlit 2-line 16-character LCD, password-protected keypad lock, and PC link via RS232 for downloading sampling data

Performance Profile

Parameter	Specification
Model	LP-1
Flow Range	0.1-0.6 LPM (100-600 cc/min)
Low Flow Range	5-99 cc/min with Universal Low Flow Holder (P.N. APB-109033)
Compensation Range	600 cc/min up to 10" water back pressure 500 cc/min up to 25" water back pressure 300 cc/min up to 36" water back pressure 200 cc/min up to 25" water back pressure 100 cc/min up to 10" water back pressure
Accuracy	±5% of Compensation Range

Run Time (hours at back pressure in inches of water)

Parameter	Specification
100 cc/min	26 hr @ 3", 25 hr @ 5", 23 hr @ 10"
200 cc/min	22 hr @ 3", 21 hr @ 5", 20 hr @ 10", 19 hr @ 15", 18 hr @ 20", 17 hr @ 30"
300 cc/min	21 hr @ 3", 20 hr @ 5", 18 hr @ 10", 16 hr @ 15", 15 hr @ 20", 13 hr @ 30", 12 hr @ 36"
400 cc/min	17 hr @ 3", 16 hr @ 5", 15 hr @ 10", 14 hr @ 15", 13 hr @ 20", 12 hr @ 30"
500 cc/min	15 hr @ 3", 12 hr @ 5", 11 hr @ 10", 10 hr @ 15", 9 hr @ 20"
600 cc/min	11 hr @ 3", 10 hr @ 5", 9 hr @ 10"
Low Flow (5-99 cc/min)	8 hours using Universal Low Flow Holder

Operating Instructions

Parameter	Specification
Data Storage	Flow rate, elapsed clock time, accumulated volume, temperature, DP and any Flow Faults logged in memory for download to PC
Display	Backlit LCD with 2 lines of 16 characters
Normal Operation Display	Battery level, flow rate, elapsed time, volume collected, timer, DP & temperature
Flow Fault Displays	Flow Fault, or Filter Off

Specifications

Parameter	Specification
Power Supply	Single Pack, NiMH Batteries: 4.8 V, 2.15 Ah Triple Pack, NiMH Batteries: 4.8 V, 6.45 Ah
Recharge Time (Single Pack)	QuickOne™ 1-2 hrs, QuickFive™ 1-2 hrs, Standard 12 hrs
Recharge Time (Triple Pack)	QuickOne™ 4-6 hrs, QuickFive™ 4-6 hrs, Standard 12 hrs
Quick-Chargers	Input Voltage 100 to 240 VAC
Standard-Chargers	Input Voltage 120 VAC or 230 VAC
Approvals	CE EMC Directive (EMCD) 89/336/EEC, UL and cUL (pending), ATEX (pending)
Operating Temperature	32°F to 113°F (0°C to 45°C)
Storage Temperature	32°F to 113°F (0°C to 45°C)
Charging Temperature	41°F to 104°F (5°C to 40°C)
Case	Polycarbonate steel fiber filled, RFI/EMI-shielded
Size	4.5"H x 4"W x 2"D (11.4 cm H x 10.2 cm W x 5 cm D)
Weight	19 oz (539 g)

Elite1 Specifications  Download