Pacwill

T102

T102 UV Fluorescence TRS Analyzer Get a Quote

The Model T102 uses a high temperature external converter set at 850°C to allow conversion of hydrogen sulfide, methyl mercaptan, dimethyldisulfide, and methyl-disulfide to sulfur dioxide at this temperature with efficiency greater than 98%. A switching option alternately measures TRS and SO2 while showing both readings concurrently on the front display.

T102 Specifications

Parameter	Specification
Ranges (TRS)	Min: 0 - 50 ppb full scale; Max 0-10 ppm full scale
Ranges (SO₂)	Up to 0-20 ppm full scale (selectable, independent and dual range supported)
Measurement Units	ppb, ppm, µg/m³, mg/m³ (selectable)
Zero Noise	< 0.2 ppb (RMS)
Span Noise	< 0.5% of reading (RMS) above 50 ppb
Lower Detectable Limit	0.4 ppb
Zero Drift	< 0.5 ppb/24 hours
Span Drift	< 0.5% of full scale/24 hours
Lag Time	20 seconds
Rise/Fall Time	< 20 seconds to 95%
Linearity	1% of full scale
Precision	0.5% of reading above 50 ppb
Sample Flow Rate	650 cc/min ±10%
Power Requirements	100V-120V, 220V-240V, 50/60 Hz
Analog Output Ranges	10V, 5V, 1V, 0.1V (selectable)
Recorder Offset	±10%
Included I/O	1 x Ethernet: 10/100 Base-T 2 x RS232 (300-115,200 baud) 2 x USB device ports 8 x opto-isolated digital outputs 6 x opto-isolated digital inputs 4 x analog outputs
Optional I/O	1 x USB com port 1 x RS485 8 x analog inputs (0-10V, 12-bit) 4 x digital alarm outputs Multidrop RS232 3 x 4 - 20mA current outputs
Operating Temperature Range	5 - 40°C (with US EPA Approval) 850°C (external converter)
Dimensions (HxWxD)	Analyzer: 7" x 17" x 23.5" (178 x 432 x 597 mm) Converter: 7" x 17" x 23.5"
Weight	Analyzer: 37 lbs (16.8 kg) Converter: 16 lbs (7.3 kg) Converter: 26 lbs (11.8 kg) CE version