The lightweight, easily repaired umbilical cable includes one kink-free sample line, 3 kink-resistant polyethylene lines (2 pitot & 1 orsat line), 6 type K thermocouple extensions, and five conductor electrical cable with 4-pin circular connectors. Thermocouple plugs are colored coded.

• Kink-free, wire-reinforced sample line with three polyethylene pitot/orsat lines and six color-coded Type K thermocouple extensions
• Standard 1/2 inch quick connect on the sample line and 1/4 inch pitot quick connects (3/8 inch optional), with stainless steel connects standard
• Available in standard 30, 60, and 90 foot lengths; U-bag included
• Split-Back versions cut back the sample line and exit thermocouple to 10 feet for flexible Method 17, Flexible Method 5, and Compact Method 5 setups
• Self-regulating heated sample lines maintain constant temperature up to 250°F (120°C) over the full length using PFA core and braided high-temperature construction
• Complete range of power adapters (UA-HJ, UA-3J, UA-FP2), unheated jumpers, and strain-relief accessories

Classic Umbilical Cord

Parameter	Specification
U-30	30', Method 5, 1/4" Pitot Quick Connects, Stainless Steel Quick Connects
U-60	60', Method 5, 1/4" Pitot Quick Connects, Stainless Steel Connects
U-90	90', Method 5, 1/4" Pitot Quick Connects, Stainless Steel Quick Connects
QS4/6	Stainless Steel Quick Connects 1/4" Male, 3/8" Female Pitot Quick Connects
QS6	Stainless Steel Quick Connects 3/8" Male and Female Pitot Quick Connects

Split Umbilical Cables

Parameter	Specification
US-30-10	30' Umbilical with 10' Split, 1/4" Pitot Quick Connects, Stainless Steel Quick Connects
US-60-10	60' Umbilical with 10' Split, 1/4" Pitot Quick Connects, Stainless Steel Quick Connects
US-90-10	90' Umbilical with 10' Split, 1/4" Pitot Quick Connects, Stainless Steel Quick Connects
U-BAG	Large Canvas Bag with Straps and Logo

Classic Umbilical Adapters

Parameter	Specification
UA-HJ Probe Power Adapter	Connects to umbilical 4-pin circular connector and converts to a single female receptacle for the probe power
UA-3J Power Box Adapter	Connects to umbilical 4-pin circular connector and converts to three straight blade receptacles; clamps to 1/2 inch sample line or GA-100 adapter
UA-FP Heated Filter Box Power Adapter	Connects with male plug to the 4-pin circular connector on the filter oven and allows the oven to connect to a standard receptacle
UA-FP2 Heated Filter Box Power Adapter	Includes one (1) 4 Socket Amphenol to two (2) Male Standard 120V Plugs

Self-Regulating Heated Sample Line - Cable Specifications

Parameter	Specification
Heater Cable	15 w/ft @ 50°F (10°C); 49 w/meter
Supply Voltages	120 or 220 Vac
Maintenance Temperature	Up to 250°F (120°C)
Maximum Exposure Temperature	366°F (185°C)
Standard Core	PFA tubing, 3/8" for sample and 1/4" for calibration gas
Maximum Length	15 feet

Circuit Breaker Size Vs. Maximum Length in Feet

Parameter	Specification
15 amp	120 VAC: 80 ft; 240 VAC: 160 ft
20 amp	120 VAC: 110 ft; 240 VAC: 215 ft
30 amp	120 VAC: 135 ft; 240 VAC: 270 ft

Heated Sample Line Jumper

Parameter	Specification
HSL-6-10 / -15 / -20 / -25	10', 15', 20', 25', 3/8" PFA Sample Line, with Insulation & Protective Sleeve, 120V, ~20 Watts / Per Ft.
HSL-6-10V / -15V / -20V / -25V	10', 15', 20', 25', 3/8" PFA Sample Line, with Insulation & Protective Sleeve, 240V, ~20 Watts / Per Ft.

Unheated Sample Line

Parameter	Specification
USL-10-SS	10' Unheated Line, 3/8 PTFE/Stainless Steel PTFE, SS overbraid, #28 Socket Elbow Fitting Both Ends
USL-10-SST / -15-SST / -25-SST	10', 15', 25' Unheated, PTFE/SS Overbraid, w/Thermocouple Assembly, #28 Stainless Steel, Socket Elbow Fittings
USL-10-QST / -15-QST / -25-QST	10', 15', 25' Unheated, PTFE/SS Overbraid, 1/2" Female Stainless Steel Quick Connect, w/Thermocouple Assembly, #28 Stainless Steel Socket Elbow

Strain Relief

Parameter	Specification
GA-107-9	Line Adapter (for SB-2M), includes Bracket and 3/8 inch ID Sample Line Clamp
GA-107-12	Line Adapter (for SB-2M), includes Bracket and 1/2 inch ID Sample Line Clamp
GA-107-32	Line Adapter (for SB-2M), includes Bracket and 1-1/4 inch ID Sample Line Clamp
GA-107-50	Line Adapter (for SB-2M), includes Bracket and 2 inch ID Sample Line Clamp
GA-107-57	Line Adapter (for SB-2M), includes Bracket and 2-1/4 inch ID Sample Line Clamp
GA-113	Strain relief for heated sample lines at the SB-2M; includes bracket and adjustable Velcro® strap

Umbilical Specifications  Download